Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Amarillo?
Chimney liner replacement in Amarillo typically runs $1,800 to $4,200, and a partial chimney rebuild usually lands between $3,000 and $9,000 depending on how much masonry has to come down. A straightforward stainless liner install for a standard flue sits near the low end, while a full-height rebuild on an older brick stack pushes toward the top. We give a written estimate before any work starts, so the number you see is the number you pay.
If you’ve had an inspection come back with red flags, or you’re tired of guessing whether that flue is safe to use, we handle the whole job: sweeping, inspection, and repair, with professional-grade liner systems and resurfacing built into the same visit. Call (888) 527-6071 and we’ll get you a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Quick Answer: What Should You Budget?
- Stainless liner replacement (standard flue): $1,800 – $3,200
- Custom or non-standard liner (DuraFlex / Olympia Chimney): $2,600 – $4,200
- HeatShield flue resurfacing (a repair alternative to relining): $900 – $2,100
- Partial chimney rebuild (upper courses): $3,000 – $6,000
- Full chimney rebuild: $6,000 – $9,000+
These are estimates for the Amarillo market in 2026. The written estimate you receive sets the final price, and it’s always free.
Chimney Liner & Rebuild Cost Breakdown (2026)
| Line Item | Typical Amarillo Range (Estimate) |
|---|---|
| Stainless steel liner, standard flue | $1,800 – $3,200 |
| Insulated liner with top plate and cap | $2,400 – $3,900 |
| Custom-fit liner (DuraFlex, Olympia Chimney) | $2,600 – $4,200 |
| HeatShield flue resurfacing | $900 – $2,100 |
| Flue tile crack repair (spot) | $400 – $900 |
| Partial rebuild, upper courses | $3,000 – $6,000 |
| Full rebuild, ground to crown | $6,000 – $9,000+ |
| Crown repair or replacement | $600 – $2,400 |
| Cap and venting (Gelco, Famco) | $250 – $700 |
| Full sweep before relining | $180 – $420 |
What pushes a job toward the top of a range? Height and access matter first: a tall stack above the roofline means more staging, more disassembly, and more time. Liner material and insulation add cost, and a non-standard flue shape means a custom-fit liner rather than an off-the-shelf one. Masonry condition is the biggest wildcard on a rebuild – what looks like a few cracked bricks up top can reveal a badly deteriorated inner wall that needs rebuilding. And safety: a properly installed liner has to match the appliance venting it serves, so a gas insert and a wood-burning fireplace call for different systems.
What Affects Chimney Liner & Rebuild Pricing in Amarillo
- Flue configuration. Straight flues with a clean shape take a standard liner. Offset flues, tight clearances, or an odd footprint need a custom-fit DuraFlex or Olympia Chimney liner, which costs more but actually fits.
- Masonry condition. Amarillo’s dry air and intense sun are hard on mortar and brick, especially on a south- or west-facing chimney that takes the worst of the afternoon heat. Crumbling mortar joints and spalled brick mean more of the stack has to come down.
- Chimney height and roof pitch. A taller chimney above the roofline means more scaffolding and more time. Steep roof sections also raise the access cost.
- Liner material and insulation. An insulated stainless liner holds heat better and protects the surrounding masonry, but it costs more than an uninsulated one.
- Whether relining is even needed. Sometimes it isn’t. HeatShield resurfacing can restore a damaged flue at a fraction of the cost of a full reline, and we’re equipped to apply it.
- Top-of-chimney protection. Cap and venting components from Gelco and Famco are a small line item that keeps water, animals, and draft problems out of a freshly rebuilt chimney.
One thing we’d stress: we install the brands chimney professionals trust, not whatever ships fastest. DuraFlex, HeatShield, Olympia Chimney, Gelco, and Famco all show up in the same toolkit for a reason, and mixing the right liner with the right cap and venting is what makes the job hold.
How to Save on Chimney Liner & Rebuild in Amarillo
A reline is rarely something you can postpone for long, but there are real ways to keep the bill down.
- Get the sweep and inspection up front. A dirty flue can mask what’s actually wrong. A proper sweep before we assess the liner means we’re pricing the real problem, not guessing. You can book the chimney sweep service and get the full picture in one visit.
- Ask whether HeatShield fits your flue. HeatShield resurfacing restores a damaged flue without the cost of a full reline. It isn’t right for every case, but when it is, the savings are substantial.
- Catch cracks early. A spot flue tile repair runs a few hundred dollars. A rebuild runs thousands. Sealing a hairline crack now is the cheapest work you’ll ever have done on that chimney.
- Don’t skip the cap. A Gelco or Famco cap keeps water and wildlife out and helps the flue draft properly. It’s the cheapest part of the job and the one that prevents the next repair.
- One company, no subcontractors. When the same team that finds the problem fixes it, you’re not paying for a second inspection from a different outfit. Our Amarillo service page lays out exactly what we handle.
Every estimate is free. Call (888) 527-6071 and we’ll price it honestly.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Amarillo?
A stainless steel chimney liner replacement in Amarillo typically costs $1,800 to $3,200 for a standard flue, and up to about $4,200 for a custom-fit system. Call (888) 527-6071 for an exact quote – estimates are free.
Is HeatShield cheaper than a full liner replacement?
Yes. HeatShield flue resurfacing usually runs $900 to $2,100, compared with $1,800 or more for a full reline. It restores the inner flue surface when the structure is still sound, so it depends on what the inspection finds. Call (888) 527-6071 and we’ll tell you which one your chimney actually needs.
How much does a full chimney rebuild cost in Amarillo?
A partial rebuild runs $3,000 to $6,000, and a full rebuild from the ground up typically costs $6,000 to $9,000 or more. Height, access, and masonry condition all move the number. Call (888) 527-6071 for a free written estimate.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when it’s an option – spot tile repair is $400 to $900 versus $1,800 or more for a new liner. But a flue with widespread cracking or a failed liner needs replacement; patching it just moves the problem down the road. A proper inspection settles it. Call (888) 527-6071 and we’ll both inspect and repair, so you’re not bouncing between two contractors.
Can you come today?
Same-day service is often available. Call (888) 527-6071. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Estimates are free.
Why Homeowners Call Us for Liner and Rebuild Work
Our technicians have up to 15 years of experience, and the brands we work with – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – are the ones chimney professionals actually use on real jobs. Inspection without repair capability is just paperwork. We do both. One call covers the sweep, the inspection, and the fix, and the original findings don’t get lost in a handoff.
If a Southwestern-style adobe chimney in Wolflin or a brick stack in Puckett has seen better days, we can tell you straight what it needs and what it will cost. Call (888) 527-6071 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Amarillo market as of 2026. Chimney Sweep Amarillo offers free estimates – call (888) 527-6071.
Written by the team at Chimney Sweep Amarillo.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jason Doyle"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Andres Salazar"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Paige Ziegler