Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Amarillo?
Chimney repair in Amarillo typically runs $250 to $1,800 for most jobs, with simple crown and cap work landing near the low end and liner restoration or masonry rebuilds pushing toward the high end. A cracked crown, a loose cap, or a rusted damper is usually a quick, contained repair. A failing flue liner or damaged brick stack is a bigger job, and the estimate reflects how much of the chimney has to come apart before it can be put right.
Every number on this page is a typical range for the Amarillo market in 2026, not a quote. The written estimate you get after an inspection sets the final price, and that estimate is free. Call (888) 527-6071 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Amarillo chimney repairs fall between $250 and $1,800.
- Crown and cap repairs are the cheapest fixes and the most common.
- Liner resurfacing with HeatShield often costs far less than a full reline.
- Masonry rebuilds above the roofline are the most expensive repair category.
- Free estimates, upfront pricing, and inspection findings repaired by the same crew that found them.
Chimney Repair Cost Breakdown (2026)
Here is how the line items stack up for Amarillo homeowners this year. Treat each range as a starting point for the conversation, not a promise. A repair that looks like one category during an inspection sometimes turns out to be another once the chimney is opened up.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap (Gelco, Famco) | $150 – $450 | Cap and venting components to keep water, animals, and downdrafts out |
| Crown repair or rebuild | $250 – $850 | Sealing or replacing the concrete crown that sheds water off the stack |
| Damper repair or replacement | $200 – $500 | Fixing a stuck, rusted, or missing damper |
| Flue liner repair (HeatShield resurfacing) | $900 – $2,400 | Resurfacing a damaged liner to restore a safe flue without a full reline |
| Full liner installation (DuraFlex, Olympia Chimney) | $2,200 – $5,500 | New stainless liner, custom-fit to the flue |
| Masonry repointing and brick repair | $500 – $2,000 | Repointing joints and replacing spalling brick |
| Upper masonry rebuild | $2,500 – $7,500+ | Rebuilding the portion of the stack above the roofline |
| Waterproofing and flashing repair | $300 – $900 | Chase covers, flashing, and a water-repellent treatment |
The biggest cost driver is how deep the damage runs. A cap that blew loose is a small job. A cracked crown that has been letting water into the masonry for years is a much larger one, because the brick behind the crown has usually taken on water too. Liner condition is the second driver. If the liner is sound, repairs stay cheap. If it has gaps, cracks, or missing sections, the chimney can’t be used safely until the flue is addressed, and that moves the price into four figures.
We install DuraFlex and Olympia Chimney liner systems, which means a custom fit for standard and non-standard flues alike. Those aren’t boxes we stock on a shelf. They’re systems sized to your flue so the liner works the way it’s supposed to. In a market where a lot of homes have older, hand-built chimneys with uneven interior dimensions, that fit matters.
What Affects Chimney Repair Pricing in Amarillo
Amarillo sits on the High Plains, where a wood-burning fireplace gets worked hard through cold snaps and then sits idle for months of hot, dry weather. That on-and-off pattern is hard on a chimney, and it’s the reason repair quotes here often differ from what a homeowner read on a national cost page. Here are the factors that move the number:
- Weather exposure on an open plain. The wind across the Panhandle drives rain and grit against a chimney from every angle. Wind-driven water gets in behind caps, flashing, and crowns, and a repair that ignores that path will fail again. We look at how the top of the chimney handles weather before we quote the fix.
- Age and build of the masonry. Older brick stacks around the Wolflin and Plemons-Eakers neighborhoods often need repointing before anything else can be done, because the mortar joints have weathered out. Repointing is its own line item.
- Liner condition. A cracked or unlined flue can’t stay in service. HeatShield resurfacing restores many liners at a fraction of full reline cost, but a liner that’s beyond resurfacing needs a new stainless liner.
- Draft and the dry air. The dry High Plains climate keeps most homes tight, and a chimney with a weak draft pulls smoke back into the room. Solving a draft problem usually means a cap, a venting component, or a liner adjustment. It’s a real repair, not a nuisance.
- Water intrusion. Water is the single most common cause of chimney damage we find. It comes in at the crown, the flashing, or the cap. Fixing where it gets in is cheaper than fixing the masonry it ruined.
- Access and height. A tall stack above the roofline costs more to work on safely. Rebuilding a tall stack is a bigger job than rebuilding a short one, and the price reflects it.
Why Chimney Repairs Cost What They Cost
Homeowners sometimes ask why a cap costs a couple hundred dollars and a liner costs a couple thousand. The answer is that these are different classes of work. A cap is a component bolted or strapped onto the top of the chimney. A liner is a system inside the chimney that has to be measured, fitted, and tested for draft and seal. The material cost is higher, and so is the labor, because the liner gets worked down the entire length of the flue.
We work with a fixed roster of professional brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That roster matters for pricing and for outcome. Parts that are sized and built for the job hold up, and a repair that holds up doesn’t get repeated next year. Cheap components fail, and a failed repair costs more than the money you saved.
HeatShield is worth a word on its own. It’s the industry’s leading chimney resurfacing system, and we’re HeatShield-certified, which not every chimney company is equipped to be. On the right liner, resurfacing restores the flue without the cost of a full reline. That’s often the difference between a $900 repair and a $3,000 one. Not every liner qualifies. An inspection tells us whether yours does.
We also handle the sweep, the inspection, and the repair under one roof. Inspection without repair capability is just paperwork. When our crew finds a problem, our crew fixes it, and there’s no handoff to a different company that has to be brought up to speed on what’s wrong.
How to Save on Chimney Repair
Catching a problem early is the biggest savings available to an Amarillo homeowner. A crown that gets repaired this season stays a crown repair. Let it go, and water gets into the masonry, and the job grows. Beyond timing, here’s where the money is:
- Get the inspection first. A repair quote without an inspection is guesswork. The inspection tells you what actually needs fixing and what doesn’t, and it’s part of the free estimate.
- Compare resurfacing to full relining. If your liner is a candidate for HeatShield, resurfacing can save a substantial amount compared with a new stainless liner. Ask specifically whether resurfacing fits your flue.
- Fix water entry early. Cap, crown, and flashing repairs are among the cheapest line items on the list. They also prevent the most expensive damage.
- Ask for the written scope. A good estimate itemizes what gets done. An itemized scope makes it easy to see where the cost is and to plan the work across more than one visit if needed.
- Don’t repair what doesn’t need repair. A second opinion is a fair thing to ask for. We’ll tell you what’s sound and what isn’t instead of selling a reline you don’t need.
Estimates are free at Chimney Sweep Amarillo. Call (888) 527-6071 to book one, and we’ll put the findings in writing with a clear price for each repair.
When to Get a Chimney Repair Quote
Some signals mean a chimney needs a closer look now rather than later. If you notice any of these, book an inspection before you use the fireplace again:
- Crumbling mortar or loose bricks on the chimney exterior
- A crack in the crown or visible gaps where the crown meets the flue
- Stains on the ceiling or walls near the chimney
- Smoke rolling back into the room when the fireplace is lit
- A missing or rusted cap
- A damper that won’t open, close, or seal
- A report from another contractor flagging a flue or liner problem
Any one of these is reason enough to get a look. Water stains and smoke rollback in particular tend to get worse, not better, and they can point to a liner or crown problem that’s cheaper to fix now. When a red-flag report comes in from another company, we’re glad to give a second opinion and pair it with the actual fix, not just a new report.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Amarillo?
Most chimney repairs in Amarillo cost $250 to $1,800. Small jobs like a cap or damper repair sit at the low end, while liner restoration and masonry work move into four figures. The written estimate sets the price after inspection. Call (888) 527-6071 for a free quote.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper. HeatShield resurfacing of a repairable liner typically runs $900 to $2,400, while a full stainless liner install runs $2,200 to $5,500. A liner that can be resurfaced saves a significant amount. An inspection tells you which applies to your flue. Call (888) 527-6071 to find out.
How much does a chimney cap cost in Amarillo?
A chimney cap installed in Amarillo typically costs $150 to $450, depending on the cap and the flue dimensions. A cap keeps water, animals, and downdrafts out of the chimney, which prevents costlier damage later. Call (888) 527-6071 for an exact quote.
How much does a chimney crown repair cost?
Crown repair or rebuild in Amarillo usually runs $250 to $850. The crown is the concrete top that sheds water off the stack, and a cracked crown is a common cause of water getting into the masonry. Fixing it early protects the brick beneath it. Call (888) 527-6071 for a free estimate.
How much does it cost to rebuild a chimney?
A full upper masonry rebuild, meaning the portion above the roofline, typically runs $2,500 to $7,500 or more in Amarillo, depending on height and how much brick needs replacing. Repointing and smaller brick repairs cost far less. Call (888) 527-6071 and we’ll tell you which end of that range you’re on.
Same-Day Repair and What Happens When You Call
When you call (888) 527-6071, the first thing we do is listen to what’s going on and get an inspection scheduled. We answer 24/7, and we dispatch technicians Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening. A free estimate comes with a look at the chimney and a written price for each repair we recommend. Because we handle the sweep, the inspection, and the fix, the crew that finds the problem is the crew that fixes it. If you’re weighing repair options and want an honest read on what your chimney needs, reach out and we’ll take a look.
Pricing reflects the Amarillo market as of 2026. Chimney Sweep Amarillo offers free estimates – call (888) 527-6071.
Written by the team at Chimney Sweep Amarillo.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jason Doyle"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Andres Salazar"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Paige Ziegler