Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Amarillo?
Fireplace services in Amarillo typically run $89 to $289 for a chimney sweep, $150 to $450 for a Level 1 or Level 2 inspection, and $350 to $4,500 for repairs depending on what’s found. A HeatShield liner resurfacing usually falls between $1,200 and $2,800, while a full stainless liner replacement runs $2,500 to $6,500. Every price we quote is an estimate until a written scope sets the final number.
We handle the sweep, the inspection, and the repair as one job, so a finding on the inspection doesn’t send you hunting for a second contractor. If you’re past due for maintenance or want a second opinion on a red-flag report, we can help.
Key Takeaways
- Sweep: $89 to $289 typical, depending on the flue and how much creosote has built up.
- Inspection: $150 to $450, with Level 2 video scans at the top of that range.
- HeatShield resurfacing: $1,200 to $2,800 – often thousands less than a full reline.
- Stainless liner replacement: $2,500 to $6,500 depending on length and flue configuration.
- Free estimates and a written scope before any work begins.
Fireplace Services Cost Breakdown (2026)
The numbers below reflect what Amarillo homeowners can expect to budget in 2026. They’re typical ranges, not a menu – the written estimate after we look at your flue is the real number.
| Service | Typical Cost Range | What It Covers |
|---|---|---|
| Standard chimney sweep | $89 – $289 | Removal of soot, creosote, and debris from the flue and firebox; a visual check of the firebox and damper. |
| Level 1 inspection | $150 – $250 | Visual inspection of accessible chimney and firebox areas, suitable when the appliance hasn’t changed. |
| Level 2 inspection (video scan) | $275 – $450 | Camera inspection of the flue interior, recommended after a chimney fire, a change in fuel type, or a sale. |
| HeatShield liner resurfacing | $1,200 – $2,800 | Restores a cracked or spalled clay flue without a full reline, using a proprietary resurfacing system. |
| Stainless liner replacement | $2,500 – $6,500 | Custom-fit DuraFlex or Olympia Chimney liner sized to your flue; includes insulation and cap work where needed. |
| Chimney cap replacement | $185 – $450 | Fabricated cap and screen installation using Gelco or Famco components to keep out water, animals, and downdrafts. |
| Masonry and crown repair | $350 – $3,000 | Repointing mortar joints, rebuilding a damaged crown, or sealing a leaking chimney chase. |
| Flue cap, screen, and damper work | $150 – $600 | Damper repair or replacement, top-sealing damper installs, and screen repairs. |
What pushes a job toward the top of a range is usually flue condition. A lightly used fireplace with annual sweeping is a quick job; a flue packed with glazed creosote, a cracked clay liner, or a chimney that hasn’t been touched in a decade is a longer one. Roof access and chimney height matter too – a taller chimney takes longer to reach and inspect safely. Parts run up the ticket as well: a custom-fit liner sized to a non-standard flue costs more than an off-the-shelf fit, which is one reason we keep DuraFlex and Olympia Chimney in our product mix. Where we can save you money is choosing the right repair. HeatShield resurfacing restores a damaged flue without the cost of a full reline when the liner’s condition allows it.
What Affects Fireplace Services Pricing in Amarillo
- Creosote buildup. A light dusting of creosote sweeps out fast. Glazed, hardened creosote takes more time and tools to remove safely, and if it’s severe enough, the flue may need resurfacing.
- Flue condition and liner type. A sound clay liner needs nothing extra. A cracked or spalled liner means either HeatShield resurfacing or a new stainless liner, and which one you need is a repair decision, not a sales pitch.
- Chimney height and roof access. A taller chimney or a steep roof pitch adds time to get up and off safely. On a practical level, that’s part of the labor cost.
- Whether you need a Level 1 or Level 2 inspection. A routine annual check is a Level 1. A camera scan (Level 2) costs more because it’s more thorough – it’s what we recommend after a chimney fire, a fuel change, or a red-flag finding from another contractor.
- Parts and brand selection. Custom-fit liners, quality caps, and proper screens cost more than generic parts. We carry Gelco, Famco, and Copperfield because a cap that seals well is what stops water and animal problems before they start.
- How many items you need fixed at once. Sweeping plus an inspection plus a cap install in one visit usually comes in lower than the same work done as separate trips.
How to Save on Fireplace Services
The biggest savings in fireplace service come from staying ahead of problems instead of chasing them. A few practical moves:
- Bundle your sweep and inspection. Having the sweep and inspection done at the same time costs less than booking them separately.
- Ask about HeatShield before you agree to a full reline. If another contractor quoted you a reline, ask whether resurfacing is an option. When the flue qualifies, HeatShield can save thousands over a full replacement.
- Don’t skip the annual sweep. A yearly sweep keeps creosote from reaching the point where it needs a specialty removal, and a clean flue drafts better.
- Get a second opinion on a red-flag report. If you’ve been told you need an expensive repair, it’s worth getting a written second opinion from someone who can also do the fix. That’s the whole point of having sweep, inspection, and repair under one roof.
- Free estimates. We give free written estimates before any work. Call (888) 527-6071 to schedule one.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Amarillo?
A standard chimney sweep in Amarillo typically runs $89 to $289, depending on flue condition and how much creosote has built up. Call (888) 527-6071 for an exact quote – estimates are free.
Is it cheaper to repair a chimney liner or replace it?
Repair is usually cheaper when the flue is sound enough for HeatShield resurfacing: typically $1,200 to $2,800 versus $2,500 to $6,500 for a full stainless liner replacement. Whether your flue qualifies depends on its condition – a camera inspection tells us which route makes sense. Call (888) 527-6071 to schedule one.
How much does a chimney inspection cost in Amarillo?
A Level 1 inspection typically costs $150 to $250, and a Level 2 with a video scan runs $275 to $450. We recommend a Level 2 after a chimney fire, a change in fuel type, or a report that flags structural concerns. Call (888) 527-6071 to book one – estimates are free.
Can you come today?
Same-day service is often possible; fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (888) 527-6071 – we answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Do you charge for estimates?
No. Estimates are free, and the price is set per job in writing before any work starts. Our technicians have up to 15 years of experience, and we work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield to get the right parts for your flue. Call (888) 527-6071 for a free estimate.
Why We Handle Sweep, Inspection, and Repair Together
Inspection without repair capability is just paperwork. When a camera scan finds a cracked liner or a failing cap, you shouldn’t have to take that report to a different company and start over. We do all three: sweep, inspect, and fix. That means one crew sees the problem, quotes the fix, and does the work. It also means our findings are grounded in what we can actually repair, not just what we can flag.
The brands we carry matter here too. HeatShield is the industry’s leading chimney resurfacing system, and it lets us restore a flue without the cost of a full reline. DuraFlex and Olympia Chimney liners let us build a custom-fit solution for standard and non-standard flue layouts. Gelco, Famco, and Copperfield components cover the top of the chimney – the cap, screen, and venting that keep out water, animals, and downdrafts. We carry and install the brands chimney professionals trust, not whatever ships fastest.
If you’re in Amarillo and you’ve been putting off maintenance, this is a good season to get it done. If you’ve got a red-flag report from another contractor and want a second opinion paired with a fix, that’s exactly the work we do.
Call (888) 527-6071 for a free fireplace services estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed Saturday. One call covers the sweep, the inspection, and the fix.
Written by the team at Chimney Sweep Amarillo.
Pricing reflects the Amarillo market as of 2026. Chimney Sweep Amarillo offers free estimates – call (888) 527-6071.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jason Doyle"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Andres Salazar"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Paige Ziegler